Product

Product

Professional Supplier of Coatings

Current Location:Homepage Product Product Category HDPE

HDPE

As ordinary polyester resin can only meet the weather resistance requirement of 3 to 5 years, and the raw material cost of using fluorocarbon resin coatings is too high, in response to market demands, our company has specially developed a high-weather-resistant polyester coil coating. After aging resistance tests, its weather resistance can reach 8 to 10 years. The polyester resin in this coating has a special chemical structure. This resin has a linear structure to is completely polymerized from monomers without carbon-hydrogen (C-H) double bonds. It has excellent resistance to yellowing and good light retention performance. This coating can be applied either as a single coat or in double coats. It has good application adaptability and the coating features excellent gloss, hardness and chemical resistance.

COATING PERFORMANCE TESTING INDICATORS

ITEMSPECIFIC OF INSPECTIONREMARK

Film Appearance

smooth, no bubbles, no crater on surfaceby visual
Finenessglossy: ≤10μm; matt: 17~20μmfineness gauge
Viscosity110-130‘’/25°CFD4#viscometer
Wet film densitySolvent:0.8-1.9; white: 1.3; back coating: 1.8100ml weight cup
Solid Content

white:60%-65%; silver: 55%±2: other solid

color: 53±3%; red,black: 50%; back coating: 78%

105°C×3Hr 
Glossglossy: less than 3°-100°60°gloss meter
Adhesion1mm×1mm×100/100cross-cut test
Hardness≥2H(close to FEVE, more than PVDF)Mitsubishi pen
Impact1/2Φx1000gx50cm,no crack impact tester
T-bendLess than 2TT-bending machine
Solvent Resistance≥100 (kilogram force)MEK
Boiling Resistance99±1°C 2hour, no bubbles, no peelsthermostatic water bath
Dyne38 dyne/cm-42dyne/cmDyne pen

HIGH WEATHER RESISTANCE(HDPE)POLYESTER COIL COATING TECHNOLOGY


· Roller coating
· Two-Coat and Two-Stove

  • Pre-treatment

    1

  • Drying

    2

  • HDPE primer paint special for roller coil(10μm)

    3

  • Drying(209-216°C×60-70)

    4

  • Roller HDPE finish coat paint (film thickness18-20μm)

    5

  • Drying(224-241°C×70-90)

    6

  • Inspection

    7

  • Winding

    8